Our beautiful Classic Marble Herringbone LVT is a super hard wearing range, ideal for all busy home interiors & commercial areas. Classic Marble Herringbone has been designed with bathrooms in mind. Its waterproof and slip-resistant properties also make it perfect for kitchens, dining rooms and playrooms. These designs benefit from a high-definition print, meaning the design looks incredibly natural, while retaining all the benefits of LVT. This range is fitted using the glue-down method and can be used in all areas of the home. Due to the tough PU wear layer on the planks, the designs are very easy to clean and maintain.
Initial cleaning after your new floor has been installed:
• Avoid walking on the floor for at least 24 hours following the completion of the installation • Sweep or vacuum to prevent loose dirt or grit from scratching the floor • Polishing your floor can be beneficial to help prevent slight surface scratches and to provide further protection
Day to day cleaning: • Sweep or vacuum the floor to remove loose dirt, grit or dust • Use clean mops and neutral cleaning solutions to regularly clean your floor. • Dilute the floor cleanser to the manufacturer’s instructions • Mop the floor evenly • Collect any excess liquid in a mop bucket • Rinse the floor with clean water and allow to dry
We would recommend:
• Installing barrier mats at entrances to pick up grit and moisture. • Ensure your furniture is fitted with protective pads where necessary to prevent scratches • Use protective cups under heavy furniture to prevent indentation • Remove spillages as quickly as possible to reduce risk of staining and causing slip hazards • Always use clean equipment when maintaining your floor • Regularly trim pets claws as these can cause fine scratches
Regular cleaning is more beneficial to the floorcovering and is more cost effective than occasional heavy cleaning.
You do not have any samples in your basket.